All 2013 models of EconoRed I Conveyor Dryers feature higher-wattage heaters, longer warranties, improved exhaust systems and digital readouts, it was announced by Mark Vasilantone, president.
The EconoRed I 30 model with 30 in. (76 cm) belt width has a new 4300-watt heater (up from 3500 watts) capable of curing 190+ pieces per hour per chamber. The EconoRed I 54 with a 54 in. (137 cm) belt width has two new 4300-watt heaters (total 8600 watts — up from 7000 watts) capable of
 |
| EconoRed I 54 model for 2013 adds: two 4300-watt, high-density, medium-wavelength heaters (total 8600 watts) with 15-year warranty; a new exhaust system; and a new digital readout displaying DC volts. |
curing 380+ pieces per hour per chamber.
In addition to higher wattage, the heaters feature closely spaced coils that provide high-density, medium-wavelength infrared heat for maximum cure speed without cold spots or under-curing associated with conventional units. Adjustable from 2 to 7 in. (5.1 to 17.8 cm) above the belt for maximum heating efficiency, the heaters now carry an industry-leading 15-year warranty.
Both EconoRed I and EconoRed II models also feature: a new exhaust system that cools the outer cabinet while evacuating moisture and fumes; a new digital readout that displays DC volts, allowing the operator to accurately repeat or fine-tune drying results at any future time; and a belt tracking system for increased belt life.
Vastex USA
www.vastex.com
